Product: TV/Video > TVs > LCD TV
To un-gray the Plug and Play selection and make it accessible, turn on your TV, and then press the Source button on your remote until you have selected either Ant (Antenna) 1 or Ant 2 (Cable).
Note: The Plug and Play selection is active and accessible only if you have set the source to either Ant 1 or Ant 2. If you have your TV set to any other source, the Plug and Play selection is grayed out and inaccessible. Plug and Play will memorize channels only if you have a live, broadcasting source attached to either Ant 1 or Ant 2, or both. Generally, this means an antenna to Ant 1 and/or a cable line from the wall to Ant 2.
Important: Plug and Play sets your TV's internal tuner memory and will not run if you have set your TV to any other Source but Ant 1 or Ant 2. Devices you attach to other Sources on your TV, such as a set-top-box attached to your TVs HDMI jack, usually have their own internal tuners and their own, separate, channel memorization functions. Your TV can not memorize channels for these devices.